Seals: Heavy Duty, Single Notch, Double Notch and Friction Crimp Seals
Heavy Duty Seal
Single Notch Seals
Seal # Strap Width Seal Type Seal Length Seal Gauge Std. Pack Shipping Wt. Std. Pack per Skid Skid Pack (M) Recommended Tool in mm in mm in mm lbs kg 634PB
3/4 19 Push 1-3/32 27.8 .032 .813 2500 49 22.2 32 80 C17, C18, C19
482-12^
1-1/4 31.8 .033
.838
2000 44 20.0 16 32 SHC
1034PB**^
1-1/4 32 1-9/16 39.7 .032 .813 1000 49 22.2 32 C11C, 10D
Double Notch Seals
Seal # Strap Width Seal Type Seal Length Seal Gauge Std. Pack Shipping Wt. Std. Pack per Skid Skid Pack (M) Recommended Tool in mm in mm in mm lbs kg M-48LH
1/2 13 Magazine 1-3/4 44.5 .030 .762 2000 34 15.4 24 48 C16G
632**
3/4 19 Closed 1-25/32 45.2 .032 .813 2500 59 26.8 20 50 C11D, C19
632PBH
Push .035 .889 2500 78 35.4 635H
Magazine 1-1/2 38.1 .030 .762 2000 35 15.9 40 80 A12, 14, ~G9
637**
Semi-Open 1-25/32 45.2 .032
.813
43 19.5 20 40 C11D, C19
481-12 ^
Push 2-1/4 57.2 .033 .838 1500 63 28.6 16 24 PRH
832PB*
1 25 .026 .660 1000 42 19.1 40 40 837*
Semi-Open 2 50.8 18 18 C11, C19
1032**
1-1/4 32 Closed 2-1/4 57.2 .032 .813 1200 56 25.4 20 24 C11D, C16
1032PBH^**
Push .035 .889 1000 73 33.1 20 1032 1-25/32 38.1 2000 1035
Magazine .030 .762 55 25.0 40 80 A12
1035H
.035 .889 64 29.0 24 48 A14, ~G9
1037**
Semi-Open 2-1/4 57.2 .032 .813 1000 45 20.4 20 20 C11D, C19
1042+¤
Closed 3 76.2 .042 1.067 600 58 26.3 12 C6F, PHDS
1642
2 51 500 70 31.8 12 6
Warning: Seal Gauge must be matched to strapping gauge. Crimp joints should be used with non-lubric strapping only (except Grit seals O.K. on lubric).
Friction Crimp Seals
Seal # Strap Width Seal Type Seal Length Seal Gauge Std. Pack Shipping Wt. Std. Pack per Skid Skid Pack (M) Recommended Tool in mm in mm in mm lbs kg 1036SSG+¤
1-1/4 32 Closed - 2 Crimp 2-1/4 57.2 .035 .889 1000 49 22.2 20 20 C6A, PHDS
1036SG+¤
3 76.2 500 40 18.2 12 6 1036LG
Closed - 5 Crimp 5-1/2 139.7 62 28.1 1046S*+
Closed - 2 Crimp 2-3/4 69.9 .042
1.067
1000 89 40.4 24 24 C6A, C8H
M-1056++
Closed - 2 Crimp .050 1.270 500 53 24.1 20 10 C7A, C8H
1056LG
Closed - 5 Crimp 5-1/2 139.7 102 46.3 12 6 1057SG++
Semi-Open - 2 Crimp 3 76.2 64 29.0 20 10 C6A, C8H
1057LG
Semi-Open - 5 Crimp 5-1/2 139.7 400 70 31.8 12 4.8 1656+
2 51 Closed - 2 Crimp
3 76.2 500 95 43.1 6 C6A, PHDS
1656LG
Closed - 4 Crimp 4-1/2 114.3 118 53.5
* Non-Stock
** When shipped in buckets, seal quantities vary. Contact your RAPZ representative.
+ Requires 2 seals per joint.
++ Requires 3 seals per joint.
^ Available with peaked crown. Specify on the order.
^^ Series or model number only. Be sure to match with applicable tool width.
¤ Special Order: minimum quantity 100,000 seals.
~ Strapping Head.
Home Page | News | Company Profile | Products | Power Strap Machines | Technical Service
Online Ordering | Literature | Tool Repair | Contact Us | Terms & Conditions
